PEM · Drum Coating Machines

Drum Coating Machine PEM70

Model: PEM70 High capacity, automatic discharge

A semi-automatic drum coating machine with a 160 litre drum and 40 litre effective capacity, developed for uniform coating, drying and curing of small parts in volume production.

  • Made in Türkiye
  • Custom sizes and capacities available
  • Installation & technical support

Pricing is quoted according to model, capacity and optional equipment.

Product description

The PEM70 is the high-capacity model of the PEM group. With a closed drum of 850 mm diameter and a 40 litre effective load, it processes large batches in a single cycle and keeps operator involvement to a minimum when coating or varnishing buckles, accessories and small fasteners. It was designed for volume production plants that need to eliminate the quality variation inherent in manual spraying.

Operating principle

The drum rotates on an axis adjustable between 30 and 45 degrees to the floor. Internal paddles keep the parts in constant motion while an automatic spray gun coats every surface step by step. After coating, drying and curing take place in the same drum using leak-free hot air circulation. Air laden with paint mist is extracted, passed through an EN779 F5 exhaust filter and vented outside. At the end of the cycle the drum opening is automatically tilted to face the floor and the parts are discharged into crates.

Equipment

  • Lever-operated drum lid supported by gas springs
  • Transparent inspection window with LED lighting and a sampling hatch
  • Pneumatic pressurised 3 litre paint tank
  • Electrical panel prepared for semi-automatic cycles

The Prestij Endüstri PEM70 is intended for manufacturers who need consistent quality and low labour cost at high production volumes.

Applications

  • High-volume buckle and accessory coating lines
  • Manufacturers of small metal and plastic parts
  • Varnish and decorative coating applications
  • Contract coating workshops

Key features

  • Large batch capacity: 160 litre drum with 40 litre effective load
  • Uniform and repeatable coating quality
  • Automatic tilting discharge for short cycle times
  • EN779 F5 exhaust filter for clean air extraction
  • Drum angle adjustable from 30 to 45 degrees; speed from 3 to 30 rpm
  • Coating, drying and curing in one machine
Get a Quote

Request a quote for this product

Fill in the form; we will prepare your quote according to the model, part type and capacity.

  • Part material (rubber, silicone, bakelite, metal) and size
  • Target daily / hourly quantity
  • Existing line and layout constraints
  • Required process: deflashing, washing, drying, coating

Call Now