Rubber Washing, Drying & Polishing Machine YKC140
A surface treatment machine that washes, rinses, polishes and dries rubber parts in a 140 litre stainless steel drum using atomised hot water and an 18 kW fan heater, with tilting discharge.
Three capacities that wash, rinse, hot-air dry and polish rubber and silicone parts in a single machine: YKC140, YKC200, YKC300.

Parts leaving the mould carry release agent, dust and flash residue. The YKC series washes, rinses, dries with a fan heater and polishes these parts inside a stainless basket, with polish dosed by pump. Loading is manual; unloading is done by tilting the basket mechanically.
YKC140 works with atomised water and a 10 kW water heater; YKC200 and YKC300 are designed for higher-capacity lines with a 150 bar water jet, wastewater pH control and an AISI 316 wet zone.
A surface treatment machine that washes, rinses, polishes and dries rubber parts in a 140 litre stainless steel drum using atomised hot water and an 18 kW fan heater, with tilting discharge.
A surface treatment machine with a 200 litre basket and 150 bar water jet that pressure-washes, rinses and dries rubber parts with an 18 kW fan heater, with wetted parts in AISI 316 stainless steel.
A high-capacity surface treatment machine with a 300 litre basket and 150 bar water jet that washes, rinses and dries large batches of rubber parts with a 21 kW fan heater, with AISI 316 wetted parts.
Tell us the part type, daily volume and your current line; we will send the suitable model and a quote shortly.