Rubber Washing, Drying & Polishing Machine YKC200
A surface treatment machine with a 200 litre basket and 150 bar water jet that pressure-washes, rinses and dries rubber parts with an 18 kW fan heater, with wetted parts in AISI 316 stainless steel.
A surface treatment machine that washes, rinses, polishes and dries rubber parts in a 140 litre stainless steel drum using atomised hot water and an 18 kW fan heater, with tilting discharge.
Pricing is quoted according to model, capacity and optional equipment.
The YKC140 is a single-drum surface treatment machine developed for washing, rinsing, polishing and drying rubber and silicone parts coming from the mould or from deflashing. Mould release residues, dust and flash fines are removed in one cycle, and with optional polish dosing the parts leave the machine with a shipment-ready surface.
Parts are loaded manually into the 140 litre drum of 686 mm diameter, made of 304-grade perforated stainless steel with 2 mm holes; the maximum load is 70 litres or 150 kg. Washing and rinsing use mains water atomised through a 6 bar air nozzle. The built-in 10 kW water heater raises the water temperature to a maximum of 50 °C. Water consumption is 4 litres per minute and can be reduced to 2.5 litres if required. One dosing pump each is provided for detergent and polish. In the drying stage an 18 kW fan heater circulates hot air through the drum. At the end of the cycle the drum is tilted mechanically to discharge the parts.
By combining the finishing steps of rubber part production in one machine, the Prestij Endüstri YKC140 saves floor space, labour and time.
Fill in the form; we will prepare your quote according to the model, part type and capacity.