Cryogenic Deflashing Machine CDM60
A compact cryogenic deflashing machine with a 60 litre drum that freezes moulded rubber and silicone parts with liquid nitrogen and strips their fine flash by media blasting.
A high-capacity cryogenic deflashing machine with a 300 litre drum and a 120 litre or 80 kg load that strips fine flash from high-volume rubber production using liquid nitrogen and media blasting.
Pricing is quoted according to model, capacity and optional equipment.
The CDM300 is the largest model in the CDM group. Its 300 litre drum takes 120 litres or 80 kg of parts per cycle and is designed to handle the high daily tonnage of large rubber and silicone moulders within a single shift. The large load capacity lowers nitrogen consumption and labour cost per part.
Moulded parts are loaded manually into a round perforated stainless steel drum. Liquid nitrogen injected into the rotating drum shock-freezes the parts; the embrittled fine flash is broken away by granules thrown by a dedicated turbine running at 4500 to 6000 rpm. Broken flash and granules fall onto a 2/3-layer screen system below: coarse flash is separated at the top, granules in the middle and fines smaller than the granules at the bottom. Granules are returned to the turbine while the flash is collected in the bin underneath. At the end of the cycle the drum moves out of the machine and rotates to discharge the parts.
The Prestij Endüstri CDM300 was developed for high-volume plants that want to remove deflashing as a production bottleneck.
Fill in the form; we will prepare your quote according to the model, part type and capacity.