CDM · Rubber & Silicone Deburring Machines

Rotary Rubber Deflashing Machine DKCM20

Model: DKCM20 Nitrogen-free mechanical pre-treatment

A rotary deflashing machine that strips the peripheral flash from small pressed rubber parts mechanically in 1-2 minutes without liquid nitrogen, running automatically on a load-and-discharge cycle.

  • Made in Türkiye
  • Custom sizes and capacities available
  • Installation & technical support

Pricing is quoted according to model, capacity and optional equipment.

Product description

The DKCM20 is a rotary deflashing machine designed to remove flash from small pressed rubber parts quickly and simply. Unlike cryogenic systems it uses no liquid nitrogen; flash separation is purely mechanical, achieved by spinning the parts at high speed inside a 360 mm diameter drum. This keeps running costs low and installation straightforward.

Operating principle

Parts are loaded into the 20 litre drum; the effective capacity is 5 litres. As the drum rotates at 3000 to 4500 rpm, the thin peripheral flash is torn away by centrifugal force and the rubbing of the parts against each other. The flash surrounding a product is typically removed in as little as 1-2 minutes. The machine runs automatically on a load-and-discharge cycle: the operator loads the parts, starts the cycle and discharges the parts when the timer expires.

Combined use with cryogenic deflashing

The DKCM20 is an ideal pre-treatment station for Prestij CDM series cryogenic deflashing machines. When coarse, easily detached flash is removed mechanically first, the cryogenic stage runs shorter cycles and consumes less liquid nitrogen, so the total cost of deflashing drops noticeably.

  • 9.9 kW installed power, 400 V supply
  • 5-7 bar working pressure
  • Compact 1800 × 900 × 1400 mm body, 320 kg

Applications

  • Small pressed rubber parts
  • O-ring, gasket and small bumper production
  • Mechanical pre-treatment before cryogenic deflashing
  • Small workshops without a nitrogen supply

Key features

  • No liquid nitrogen required, low running cost
  • Short cycle time of 1-2 minutes
  • Automatic load-and-discharge operation
  • Reduces nitrogen consumption when paired with CDM series machines
  • High drum speed of 3000 to 4500 rpm
  • Compact body and simple installation
Get a Quote

Request a quote for this product

Fill in the form; we will prepare your quote according to the model, part type and capacity.

  • Part material (rubber, silicone, bakelite, metal) and size
  • Target daily / hourly quantity
  • Existing line and layout constraints
  • Required process: deflashing, washing, drying, coating

Call Now